2019 Gouldsboro Data – Part 1 – The Experiments

During 2018 the Gouldsboro shellfish committee and the CSI-Maine project set out “experimental unit” — our “plant pot” experiments — in two coves that were once productive but that are now so overrun by crabs that they are considered to be “dead mud.” This spring, a team of students in the Pathways program at Sumner Memorial High School is analyzing the data so that they can be presented to the shellfish committee and others on March 20.  This is the first in a series of posts that document that work.  We will look both at what the students did and at what the data show about the two sites. 

Locations of the Sites

The Gouldsboro shellfish committee and its clam warden, Mike Pinkham, decided on the experimental sites in collaboration with Kyle Pepperman of the Downeast Institute (DEI). Both sites are close to other areas that are known to be productive, so it was reasonable to think that there might be potential to bring these sites back to productivity.  The map, below, shows the two sites in blue.

2018 Gouldsboro experimental sites

Names of bays and coves sometimes have local names rather than “official” names. Bunker Cove is actually named on some maps.  The other site is not officially named; we called it “Lesko Lane” because that is the name of the small private road to the site.  The other places named on this map in yellow are the high school (SMHS); John Small Cove, where the town and students have been working with the Maine Department of Marine Resources (DMR) on other research and where Gouldsboro is actively using protective netting; Jones Cove, a site that Gouldsboro is seeding, netting, and managing with help from DEI, and the old lobster pound that is available for other experimental work.

The Experimental Plots

On May 22 of last year Mike Pinkham, Kyle Pepperman, and I set out the experiments at each of these sites.  The experiments are laid out according to the design pictured below.Lay out of experimental plots

Each circle represents a 6″ plastic flower pot.  Each pot is filled with mud from the site and 12 juvenile clams, each measuring approximately a half inch (12.5 mm) in shell length that are placed on top of each pot and covered with a thin layer of fine mud.

Half the pots are covered with protective netting (represented here by shading) and half are not covered with nets (but do have a net “collar” around the edge of the pot that keeps the small clams from moving or washing out of the pots).

Each small rectangle in this diagram represents a “block” of pots that is about 1 meter on each side.  There are 3 blocks at each tide level.  The horizontal distance between the blocks varies with the terrain but is generally in the range of 8-12 meters.  The vertical distance between each row of blocks depends greatly on the slope of the mudflat (the “tidal gradient”).  For a cove where the tide goes out a long way, the distance is greater than it is in a cove with a steeper slope.  The goal is to place the rows so that they provide information about clam growth and survival at locations that are underwater only when the tide is pretty far in (High), at locations that are underwater most of the time (Low), and in-between.

For the details of HOW to actually set these pots out, see the post titled “Setting up and Deploying the Plastic Plant Pot Experiment.

The Thinking Behind This Design

This design was developed by Dr. Brian Beal at DEI and has been used there in a number of studies over the years. Because the clams are in the pots over a full growing season, this experiment enables us to collect information about growth rate.  Because we know that each pot started out with 12 clams, we can learn something about what happens to clams even when they don’t survive and grow. (Here is a link to an articlle I wrote last year that shows how we can measure clam growh tne learn something about their fate.)

Use of nets on half the pots provides us with a picture of how important use of nets is at a particular site. Placing the pots at different locations along the tidal gradient gives us information about how predator activity and growth might change from the shore to the low tide line. If we do find that growth or survival changes along the tidal gradient, that information can help a shellfish committee in making decisions about where to focus its seeding and netting effort.

Finally, one very important feature of this design is that it does not take long to put the pots out and to retrieve them.  Apart from transportation and set up time, it takes an hour or less to set up a complete experimental site.  (Here is a link to a story about doing that with middle school students.)  Retieving the pots takes even less time.  Because this work can be done by a few adults or students and done pretty quickly, it is possible for towns to use this approach to gather information about a number of bays and coves that the town might want to return to productive use.

Once the experiments are retrieved from the mud, washing all the mud off the clams DOES take some time and is messy work. Counting and measuring the clams also takes some time, since it is work that needs to be done carefuly. But this is where schools and students can really help. It is topic we will look at in subsequent posts.

 

1 thought on “2019 Gouldsboro Data – Part 1 – The Experiments

  1. mschauff

    Thanks, Bill! What’s eye-catching about this is that it grew out of the community, and involves folks from different parts of the community: Fishermen, scientists, local town officials, and local students in an effort is to collect data to understand the cause (and find solutions to) a real problem: once-productive clam flats that have become unproductive. Everyone plays a critical role to get the work done — and the problem is very real; livelihoods (human and clam) depend on it.

    Is there a post with picture of a pot in place? And a tiny seed clam next to a full grown one?

    Like

    Reply

Leave a Reply to mschauff Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s